CWDM 4-Channel Multiplexer
CWDM Channels 1471nm, 1491nm, 1511nm, 1531nm, plus Extension Port
The data connections are transported over a number of CWDM wavelengths. The CWDM wavelengths are generated and injeced by transceiver modules (e.g. SFP or XFP modules) that are installed in the connected end devices or in an intermediary converter.
This is a purely passive device without any electronic components or power supply. It is therefore fully transparent for any protocols or data rates.
The devices contains an extension port. Later on, a suitable extension multiplexer with additional 4 channels (1551nm - 1611nm) can be connected here, to extend the capacity to 8 CWDM channels when needed.
Its fully passive optical technology makes it suitable for an environment-friendly, robust and maintenance-free backbone architecture.
- CWDM Channels
- 4x Duplex LC Connector, max. 10 Gbit/s, Channel Separation 20 nm
Supports ITU-T G.694.2.
- Extension Port
- Optional Cascading Port for an additional FOCW (4 more Channels)
Duplex LC Connector
- CWDM Network Port
- Duplex LC Connector
- Temperature 0-60°C, Humidity max. 90%
|Fiber Type||Single-mode 9µm|
|Connector Type||Duplex LC|
|Channel Insertion Loss||max. 1.5dB|
|Ext. Port Insertion Loss||max. 1.5dB|
|Channel-to-Channel Isol.||min. 30dB|
|Channel Wavelength||1471nm, 1491nm, 1511nm, 1531nm|
|Channel Spacing||ITU-T G.694.2 20nm|
|Channel Passband||+/- 6.5nm|
|Data Rate||up to 100Gbps per Channel|
|Dimension||19" 1HU, Depth 200mm, for installation in 19" rack|
CWDM transceiver modules for the end devices are not included!
Please order suitable CWDM SFP or XFP modules separately.