S2002333 - Fiber Meter Single- and Multimode to measure signal quality on optical fiber
This is a brand product by
Original Part Number:
The Fiber Meter is mainly used for checking the signal output power of the optical communication equipment in fiber optic networks. It measures the average power of a continuous light beam which emits from the equipments or other optic sources. It measures receive power in 850 nm / 1310 nm / 1550 nm.
The Fiber Meter consists of a solid state InGaAs photo diode, signal power measurement circuitry, and a 3 digits LED display. Users just connect the single-mode or multi-mode fiber optic cable between the transmission port of the network equipment and the universal interface on the Fiber Meter. (Or just connect the other end to the Light Source, see below) The Fiber Meter will show the exact amount of the received power value (in -dBm).
The universal connector can be used for all the most common fiber interfaces such as ST / SC / FC and it is suitable to test single-mode and multi-mode cables. With an optical 2.5 mm to 1.25 mm adapter, users can even test for 1.25 mm fiber interface.
- Small and robust device
- Selectable measuring wavelength 850nm, 1310nm, 1550nm
- Testing of Single-mode and Multi-mode cables
- Measuring range of 3-digit device: -40dBm ~ +5dBm
- Universal adapter for ST, SC, FC
- Usage with two AAA batteries
Delivery including softcase and batteries
|Fiber Type||Single-mode and Multi-mode|
|Connector Type||2,5mm Universal|
|Wavelength||850 nm, 1310nm, 1550nm|
|Manufacturer and Type||Liverage S2002333|
Just a few in stock, thereafter no longer available.