You are here:
Optical MTP/MPO Equipment

Optical MTP/MPO Equipment

Flexible parallel-optical patch cords and installation cables with MTP/MPO connectors, as trunk or as fan-out and suitable adaptors.
This new technology, based on a multi-mode fiber-optical cabling infrastructure, offers the opportunity to establish high performance data networks because of its minimum insertion loss and maximum return loss.
With the MPO (Multi Fiber Push-On) / MTP (Mechanical Transfer Push-On) multi-core connector is possible at this time a data rate up to 100Gbit/s over a distance of up to 150m (OM4) or 100m (OM3).

Because of the high core density of this loose tube cable with 4 up to 144 core a significant less volume is needed, which not only saves space. It also gives better conditions for air conditioning and lower potential thermal load.

All offered MPO/MTP® connectors are original parts of the manufacturer US Conec.

MTP/MPO Trunk Cables

The offered MTP/MPO Trunk-cables are available in the versions OM3 and OM4, whereby a max. transfer rate of 40Gbit/s and 100Gbit/s can be achieved over a distance of up to 100m oder 150m (OM4).
The pre-fabricated trunk cables (patch cables) with MTP female connector are suitable to be used for 850nm 40G QSFP+ Modules. Due to the plug and play principle these cables are offering a comfortable installation. Because of the excellent workmanship they are completely protected against environmental influences.

MTP/MPO Fan-out Cables

Our OM3 and OM4 MTP/MPO Fan-out Cables (harness cables) are equipped with an MTP connector on one end and with simplex or duplex LC/PC connectors on the other end. This results in the possibility to split the signal to multiple devices / switches or ports.

MTP/MPO Installation Cables

Our MTP/MPO installation cables are designed as loose-tube cables. In this type of cable, the fiber-reinforced cores are located in a water-repellent gel to rule out environmental influences. In addition they have a rodent protection, so they can be used for indoor as well as for outdoor installation.
The cables are available in the variants multimode OM3 and OM4 as Trunk Cables or Fan-out Cables.

These installation cables also have cable protections and pulling grips at both ends.
From a length of 100 meters, the fiber optic outdoor cables will be supplied on a drum.

MTP/MPO Adaptors

With these adapters you can make connections between the different MTP cables/connectors.
Here they are offered in two different plug systems: connector type key-up to key-up and key-down to key-down.

Subcategories in this Section:  
 Open all Subcategories
MTP/MPO Trunk Cables
High Quality Fiber-Optical MTP/MPO Trunk-Cables Multi-Mode OM3 and OM4, for Data rates of 10Gbps up to 100Gbps
MTP/MPO Fan-Out Cables
High Quality Fiber-Optical MTP/MPO Fanout-Cables Multi-Mode OM3 and OM4, for Data rates of 10Gbps up to 40Gbps
MTP/MPO Installation Cables
High Quality MTP/MPO loose-tube cables multi-mode OM3 and OM4 for indoor and oudoor installation.
MTP/MPO Adaptors
MTP/MPO Fiber Optic Couplers are used to convert between connector types.
All prices in EUR plus V.A.T.
When ordering, additional postage and payment costs may apply.


How can I receive a written quotation?

Dear Customer,

Our shop informs you online in detail about the prices, discounts and delivery conditions of all goods offered by us.

However, if you need a written, formal offer for operational reasons, then you should do the following in order to receive a correct and complete offer from us as soon as possible:

Put the required amount of the goods that you want to receive an offer for into the shopping cart and proceed with "Buy now".
If you already have a customer account, please log in now.
Otherwise, please create a customer registration, so that the correct address will be stored in preparation for the offer.

In the next step you will come to the page Shipping Method and Payment Method.

Here you select the desired delivery and payment method, as if you are preparing an order.
You may have your own reference or project number, which should appear on the offer, then you can enter it in the appropriate field.
Or perhaps you want to give us more relevant information in the field "Your additional message to us".

Then select "Next".

Once on the page Your Order Summary, click on  "No, I require a written quotation first"



On the next page Your Offer Request you can check your request for an offer again.

By clicking on "Request an offer" now, you will timely receive your comprehensive offer from us.




In this way, we can provide you with a detailed and error-free quote as quickly as possible, avoiding unnecessary queries.